Below is the instructions for connecting to Protight: 1) Set up a network on the access point (AP) with the following IP configuration: a) Default Gateway: xxx.xxx.xxx.1 b) SSID: "as desired" ...
When properly configured the Freeset3 will communicate with Protight Via WIFI. Below is the Protight station startup procedure. 1) Power Up PC 2) Open Protight Software 3) Click login operator and type (or Scan) in the operator ...
This error typically happens during the first uses of the tool. As RivetKing only tests 100 placings before shipping and we are unfamiliar with the customers application and selection of rivet nut size. The electronics and the load cell need to ...
Freeset3 - Loading Program(s)/Settings in Freeset Manager From .xml File. 1) Select the Freeset Manager icon and open the program 2) Login with Administrator rights 3) Click READ tool 4) Click FOLDER icon which will allow you to open an .XML file ...
Freeset 3 Only 1) Check the Program insuring in step 1, with one of, or both of the following are enabled on the gear screen. In Program Settings of Freeset Manager a) force = 225lbs and it is ENABLED b) pressure switch is DISABLED (you may also ...