"Blue Screen of Death" - PC Kernel Error

"Blue Screen of Death" - PC Kernel Error

The below error occurs under the following conditions and is usually caused by and corrected as follows:

Possible Cause:    The controller was shutdown suddenly using the switch. -OR- a CELLULAR NETCARD was left in the machine during reboot.
Reason:                 The proper shut down process should be:
                              a) shut down the RivetKing software in Task Manager if necessary.
                              b) shutdown PC using the windows icon in the lower left corner to restart the machine
Remedy:                Perform a proper reboot WITHOUT the CELLULAR NETCARD in the USB.  The machine should restart as normal. 
                                          - If the machine doesn't correct itself, or restarts the PFCS software in a foreign language, contact support.   This may require rebuilding the database.  




    • Related Articles

    • Error PC

      Indication:       - Error PC message is shown on the tool on screen display. Description:       - Error PC can occur when their is messaging misalignment between tool and PC/Controller.  Possible Cause:        A) Two replica tools are communicating ...
    • Mandrel Stop Error - RK-7XX-3

      Freeset® mandrel STOP (Service warning) If your Freeset tool becomes inoperable and the following message is displayed, then you may have a service block activated on your tool.  The service block provides preventive maintenance warnings at intervals ...
    • Tara Error

      This error typically happens during the first uses of the tool.  As RivetKing only tests 100 placings before shipping and we are unfamiliar with the customers application and selection of rivet nut size.   The electronics and the load cell need to ...